High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is a challenging issue for owners. From the desired temperature to their favorite light level, guests are more inclined to return for another stay when they can customize their room to match their preferences. However, providing these characteristics using old technology wastes a lot of energy. As an example, there are a lot of difficulties with the old card key switches. Guests can put any card in the old switches, or they may ask for more than one card. Even though hotel desk refuses to provide more than one card to a guest, she/he may claim to have lost the card.
The conventional old technology of hotel card switch. Additionally there is a lot of over intake of lights and AC energy due to things running even if guests aren’t inside their rooms, which can cause a monetary loss for that owner. Needless to say, no hotel owner desires to prohibit guests from having a comfortable stay, nor do owners expect guests to get into a dark or cold hotel. No one is to blame. Both guests and hotel owners have the right to fulfill their interests.
Some hotel owners think if they separate the AC from the main network, less energy will likely be consumed, while others feel that motion sensors are definitely the solution. However, these approaches forget to resolve the problem. The AC is regarded as the energy-consuming device of all the, and motion sensors could be nightmares because they only function based on movement detection, which means that the AC and lights might go off while a guest is sleeping or reading a book. Nightmarish!
The TIS Automation Company offers the best solution for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with its capability to detect human presence in a room. This ceiling-mounted sensor has several options, including a PIR motion sensor, an easy harvest sensor, 2X digital inputs, infrared emitters compatible with all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the newest method for hotel economical technology. By installing this door sensor in the entrance to your room, connecting it for the Energy Servant’s digital input, and programming the logic lines, the issue of room occupancy is totally resolved.
The following logics could be defined with this sensor to control room energy with no discomfort for guests:
Logic 1: If there is any movement inside the room, the occupancy mode is going to be on.
Logic 2: If the main door is closed and opened, a flag will turn on for starters minute to check if there exists movement in room. If no movement is detected after one minute, the device will activate energy-saving mode. This can be beneficial in situations when a guest enters the space briefly. In energy-saving mode all lighting is off except for a nightlight, which stays on for three hours just in case there is certainly another guest having a nap. Also, the AC will not be switched off, but its temperature will likely be decreased by 2 degrees. This helps save energy over time.
Logic 3: If the energy-saving mode is enabled with no movement is detected for longer than 3-5 hours, the nightlight and AC is going to be switched off automatically. It is additionally possible to define lower temperature levels for that AC. In addition, the Energy Servant can make the AC on/off when it understands that a balcony window/door is open. All this requires is adding a magnetic contact linked to the balcony window/door and programming the required smart decision. The sunshine harvest sensor helps save energy by wscgid balcony lights off if there is enough sunlight.
Another practical and beneficial capacity for this sensor is its built-in thermostat, which will help maintain the right temperature at all times. This will be significant for keeping furniture fresh and intact. Also, in hot spots and whether or not the room is empty for a long time, humidity and bad smells will not become a problem in the room. This sensor can be designed to alter AC to dry mode if the room temperature reaches or exceeds 28-30C degree. This may happen several times in the daytime if necessary. A similar performance can be programmed in cold spots to prevent mold.
Another choice with this smart system is TV control. If the hotel provides the guest having a room tablet, she/he will be able to control the room’s TV with it. This sensor was set up in 20 rooms within the Fairmount Blue Mountain Hotel in Sydney. The end result was considerably enhanced energy management and lots of satisfactory comments from guests who enjoyed their luxurious remain at this hotel.
TIS offers the opportunity to meet both hotel owners and guests interests and desires with only a few items as well as in probably the most power efficient possible way. For more information or to schedule a consultation, call us at www.tiscontrol.com